Dell PowerEdge 2321DS User Manual - Page 166
Enable SNMP, Con System, Click to enable
View all Dell PowerEdge 2321DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
In the SNMP category, you can enter system information and community strings. You may also designate which stations can manage the Remote Console Switch as well as receive SNMP traps from the switch. For more information on traps, see "Enabling Individual SNMP Traps" on page 150 in this chapter. If you check Enable SNMP, the unit will respond to SNMP requests over UDP port 161. NOTE: The on-board web interface does not use standard SNMP to control switches and therefore does not use UDP port 161. The on-board web interface uses a secure, proprietary protocol to communicate with the Remote Console Switches over a different network port. Figure 7-5. SNMP Configuration Window To configure general SNMP settings: 1 Click the Configure tab in the on-board web interface, then click the SNMP category in the left column. 2 Click to enable the Enable SNMP check box to allow the Remote Console Switch to respond to SNMP requests over UDP port 161. 3 Type the system's fully qualified domain name in the Name field, as well as a node contact person in the System section. 149 Managing Your Remote Console Switch Using the On-board Web Interface