Dell PowerEdge 2321DS User Manual - Page 49
Connecting to the Network, On-board Web Interface Installation and Setup, Supported Browsers
View all Dell PowerEdge 2321DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Table 2-4. Remote Console Switch Configuration With a PEM Descriptions Number 2 3 4 5 Description CAT 5e PEM SIP or Avocent IQ Module Server Connecting to the Network To connect the network and power up your Remote Console Switch: 1 Connect your network cable to the LAN port on the rear of the Remote Console Switch to your network. NOTE: If you are using a 2321DS Remote Console Switch, you will have two redundant LAN ports. If the first LAN port fails, the second one will take over. 2 Power up all attached systems in any order. 3 Attach your monitor and keyboard and mouse cable connectors to the appropriate ports on the back of your Remote Console Switch unit. On-board Web Interface Installation and Setup Once you have installed a new Remote Console Switch, you can use the onboard web interface to configure unit parameters and launch video sessions. Supported Browsers The on-board web interface supports the following browsers: • Microsoft Internet Explorer® version 6.x SP1 or later • Firefox version 2.0 or later Launching the On-board Web Interface To launch the on-board web interface: 1 Open a web browser and type the IP address of the Remote Console Switch. You can set the IP address of the switch using OSCAR or the serial port; see "Controlling Your System at the Analog Ports" on page 36 for more information. Installation 32