Dell PowerEdge 2321DS User Manual - Page 48
your Remote Console Switch unit., Remote Console Switch Configuration With a PEM
View all Dell PowerEdge 2321DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2 Attach one end of the CAT 5 cabling that will run between your PEM and the Remote Console Switch unit to the RJ-45 connector slightly separated from the other connectors on the PEM. Connect the remaining end of the CAT 5 cable to the desired ARI port on the back of your Remote Console Switch unit. 3 To one of the eight RJ-45 connectors grouped on the back of the PEM, attach the CAT 5 cabling that will run between your PEM and each device's SIP. 4 Connect the other end of the CAT 5 cable to the first of the SIPs. 5 Repeat steps 3-4 for all devices you wish to attach. Figure 2-14. Remote Console Switch Configuration With a PEM Analog User 1 2 3 4 5 Table 2-4. Remote Console Switch Configuration With a PEM Descriptions Number 1 Description ARI Port 31 Installation