Ricoh 3245 Fax Reference - Page 142
Using a Program
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Simplifying the Operation Using a Program Note ❒ Using the program causes the pre- vious settings to be cleared. ❒ If you have no programmed destinations or scan settings as programs, select the program number, and then enter the fax number of the destination and select the scan settings you require. A Make sure that the machine is in facsimile mode and the standby display is shown. E Press the {Start} key. The fax number and specified time are shown on the display, and the machine starts to scan the original. Transmission starts at the specified time. Note ❒ If the standby display is not shown, press the {Facsimile} key. B Place the original. 7 C Press the {Program} key. ZLFS310N D Confirm that [Recall] is selected, and press the registered program No. The standby display appears. Then, the programmed fax number is shown. Transmission Mode is selected. 132