Ricoh 3245 Fax Reference - Page 160

Facsimile Features IP-Fax Settings Make settings to use IP-Fax. Set H.323 for the gatekeeper, SIP for SIP server, and gateway for G3 fax if necessary. Check the settings of the network to which this machine is connected before making settings. Note ❒ The following characters can be used for registration of the alias telephone number in H.323 Setting. Make sure you enter these characters correctly: • Numbers • Symbols (# and *) ❒ The following characters can be used for registration of the SIP User Name in SIP Setting. Make sure you enter these characters correctly: ❖ Enable H.323 Specify whether or not H.323 is used for IP-Fax transmission. • On • Off ❖ Enable SIP Specify whether or not SIP is used for IP-Fax transmission. • On • Off ❖ H.323 Settings Set the IP address and alias telephone number of the gatekeeper. Note ❒ If you select "On" using the User Parameters, you can use the gatekeeper server. See p.166 "User Parameters"(switch 34, bit 0) A Press [H.323 Settings]. • Alphanumerical lower and upper cases 8 • The 21 symbols in the table below. ; ? : & = + $ , - _ . ! ~ * # ' ( ) % / B Press [Change] for each property. @ ❒ Enter the correct IP addresses for the gatekeeper, SIP server and gateway, which you have been informed by the network Administrator, using numbers and a period ("."). C Enter the IP address and alias telephone number and press [OK]. 150