Ricoh 3245 Fax Reference - Page 25
Default ID/Free Polling Reception, ID Override Polling Reception
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
❒ Polling Result Report allows you to verify Polling Reception has taken place. See p.16 "Polling Result Report". If E-mail TX Results is programmed in a Quick Operation key, you can select whether a report e-mail is sent after reception. The destination of this report can be selected from the e-mail addresses in the destination list. ❒ You can program one of the Quick Operation keys with operations for this function. Using the key allows you to omit step A. See p.144 "General Settings/Adjustment". A Press [Transmission Mode]. Polling Reception Note ❒ To cancel Polling Reception, press [Cancel]. The display returns to that of step B. 1 ID Override Polling Reception A Select [ID Override Polling Reception]. B Specify a 4-digit ID using the number keys and [A], [B], [C], [D], [E], and [F], and then press [OK]. B Press [Polling RX]. C Depending on which method you are using, select one of the following procedures: Default ID/Free Polling Reception A Check that [Default ID / Free Poll- ing RX] is selected, and then press [OK]. "ID Override: " and the entered Polling ID are shown above the highlighted [Polling RX]. Note ❒ A Polling ID may be any four numbers (0 to 9) and characters (A to F), except 0000 and FFFF. ❒ If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing [OK], and then try again. ❒ To cancel Polling Reception, press [Cancel]. The display returns to that of step B. D Press [OK]. The standby display appears. E Dial, and then press the {Start} key. 15