Ricoh 3245 Fax Reference - Page 218
Metric Version
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Appendix Limitation ❒ There may be a difference in the size of the image when it is printed at the des- tination. ❒ If you place an original larger than A3, 11"×17" on the exposure glass, only an A3, 11"×17" area is scanned. Note ❒ Even if an original is correctly placed on the exposure glass or in the ADF, a margin of 3mm (0.1") around each edge of the original may not be sent. ❒ If the receiver uses paper of a smaller width than the original, the image will be reduced to fit that paper. See p.74 "Auto Reduce". ❒ The machine detects paper sizes in the following ways: • When you place an original in the ADF, an original wider than about 264mm (10.4") is scanned as A3, 11" × 17" size. An original narrower than about 230mm (9.1") will be sent as 81/2" × 11" or 81/2" × 14" size, and an original narrower than about 264mm (10.4") is scanned as B4 JIS. Originals up to 1,200mm (47.2") in length can be scanned. • Refer to the table below for sizes the machine can detect when you place an original on the exposure glass. Because the machine scans non-standard size documents in a standard size, part of the image may be truncated depending on the length of the document. For details about how to set nonstandard size documents, see p.13 "Setting a Scan Area", Facsimile Reference . ❖ Metric Version Length *1 -approx. 249mm approx. 249mm- approx. 274mm- approx. 316mm- approx. 274mm approx. 316mm -approx. × B5 JISL A4L FL 243mm approx. B5 JISK B4 JISL B4 JISL B4 JISL Width 243mm- approx. 11 268mm approx. A4K A3L A3L A3L 268mm- 208