Ricoh 3245 Fax Reference - Page 69
Changing the Line Port
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Changing the Line Port Changing the Line Port The optional extra G3 interface unit is required. When the extra G3 interface unit is installed, you can connect to a maximum of three ports. Note ❒ When you install the extra G3 interface unit, you can specify the line port home position from "General Settings and Adjustment". See p.144 "General Settings/Adjustment". ❒ When sending a fax, you can select the line port if dialing with the number keys or Chain Dial. Option Available Available proline types tocol combi- nations Without PSTN G3 option Extra G3 interface unit PSTN+PS TN G3+G3 Extra G3 PSTN + interface PSTN + G3 + G3 + G3 4 unit + Ex- PSTN tra G3 in- terface unit ❖ G3 G3 is selected after power up or when the machine is reset. If you install the extra G3 interface unit, you can select "G3-1", "G3-2", "G3-3", or "G3 Auto"depending on the number of the installed unit. Note ❒ A maximum of three simultaneous communications are possible. You cannot perform three Immediate Transmissions simultaneously. ❒ If three communications are in progress, the display shows the first communication that was initiated A Press [Select Line]. ❖ Multi-port When the extra G3 interface unit is installed, communications can take place simultaneously through three lines at once. The following list shows protocol combinations available for each line type. 59