Ricoh 3245 Fax Reference - Page 66

Other Transmission Features On Hook Dial The On Hook Dial function allows you to dial while hearing tone from the internal speaker. You can send a fax checking the connection. Limitation ❒ This function is not available for the optional extra G3 interface unit, Internet Fax and IP-Fax. Note 4 ❒ This function is unavailable in some countries. ❒ If an Immediate TX Result Report (Immediate Transmission) is printed, On Hook Dial transmission results are not mentioned on the report. A Place the original, and then select the scan settings you require. Reference p.11 "Placing Originals", Facsimile Reference p.28 "Scan Settings", Facsimile Reference B Press the {On Hook Dial} key. You will hear a low tone from the internal speaker. 56 Note ❒ If you want to cancel this oper- ation, press the {On Hook Dial} key again. C Dial. The machine immediately dials the destination. Note ❒ You can adjust the volume of the On-hook sound by pressing [Higher] or [Lower] in the upper right-hand corner of the display. The volume can also be preprogrammed in "General Settings and Adjustments". See p.79 "Adjusting the Volume", Facsimile Reference and p.144 "General Settings/Adjustment". ❒ If you make a mistake, press the {On Hook Dial} or {Clear Modes} key, and then return to step B. D When the line is connected and you hear a high-pitched tone, press the {Start} key. The transmission starts. Note ❒ After transmission, the machine returns to standby mode. ❒ If you want to cancel a transmis- sion, press the {Clear/Stop} key, and then remove the originals.