Ricoh 3245 Fax Reference - Page 180
Changing the User Parameters
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Administrator Setting Switch 32 34 Bit Item 0 0 Quotation Priority for a desti- Paper Output Pri- nation when there is no desti- ority 1. IP-Fax destination 2. Fax number 3. E-mail address 4. Folder 0 Use gatekeeper server with Off IP-Fax 1 Use SIP server with IP-Fax Off 1 Electronic Output Priority 1. E-mail address 2. Folder 3. IP-Fax destina- tion 4. Fax number On On Changing the User Parameters Preparation Access to some User Parameter Settings requires installation of optional equipment, or that other settings be made beforehand. E Select the switch number you want to change. Important ❒ We recommend you print and keep a User Parameter list when you program or change a User Parameter. See p.171 "Printing the User Parameter List". F Select the bit number you want to change. ❒ Do not change any bit switches 9 other than those shown on the pre- vious pages. A Press the {User Tools/Counter} key. B Press [Facsimile Features]. C Press [Administrator Tools]. D Press [Parameter Setting]. 170 When the bit number is pressed, the current value switches between 1 and 0. Note ❒ Repeat from step F to change another bit number for the same switch. G Press [OK].