Ricoh 3245 Fax Reference - Page 156
Line Priority Setting, Program Economy Time, On Hook Mode Release Time, Quick Operation Key
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Facsimile Features ❖ Line Priority Setting Use this function to specify the line of usage. Note ❒ The display may differ depending on the line type you have. ❖ Program Economy Time Use this function for specifying a time for transmission when call charges are low. See p.3 "Sending at a Specific Time (Send Later)". Limitation ❒ You can program only one Economy Time. Note ❒ If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing [OK], and then try again. ❖ On Hook Mode Release Time Use this function to specify a time to cancel On Hook mode after you transmit using On Hook dialing. 8 • 1 minute • 3 minutes • 5 minutes • 10 minutes ❖ Quick Operation Key Frequently used functions programmed as Quick Operation keys are shown on the menu immediately after the power is turned on. The Quick Operation keys can be programmed with the following functions: • Journal • TX Status Display (Transmission File Status) • Print Confidential RX File (Print Confidential Reception) • Print Memory Lock File 146 • Stored File • Send Later • Auto Document • 2 Sided Original • Closed Network • Polling Transmission (Polling Transmission) • Polling Reception (Polling Reception) • Fax Header Print • Label Insertion • RX File Status (Reception File Status) • Forwarding • Transfer Request • Switch RX Mode (Reception Mode Switch) • Manual E-mail RX (when the Internet Fax is set to ON.) • TX Status Report (Transmission Status Report) • Sender Settings • E-mail TX Results(E-mail Transmission Results) Up to three functions can be programmed into a Quick Operation keys. A Select Quick Operation Key you want to program. B Select the function you want to program in the Quick Operation Key .