HP HD Pro 2 User Guide - Page 12
Power ON the scanner.
View all HP HD Pro 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2. Power ON the scanner. 3. The scanner should be warm - apply only for the HP HD Pro Scanner. Make sure that the scanner has been turned on for at least one hour prior to calibration. Slight light intensity changes and camera shifting can occur just after turning the scanner on and the warm-up time will ensure that light conditions and camera heights have stabilized. 4. Select the Setup tab. 5. Press and select Scanning 6. Press the Calibrate button to start the Calibration wizard.
2. Power ON the scanner.
3. The scanner should be warm - apply only for the HP HD Pro
Scanner.
Make sure that the scanner has been turned on for at least one hour
prior to calibration. Slight light intensity changes and camera shifting
can occur just after turning the scanner on and the warm-up time
will ensure that light conditions and camera heights have stabilized.
4. Select the Setup tab.
5. Press
and select Scanning
6. Press the
Calibrate
button to start the Calibration wizard.