Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1045

Version 8.3.12.0 8.3.11.1 7.5.1.0 6.3.1.0 Description Introduced on the S4810. Introduced on the Z9000. Added IPv6 ISIS support. Version 6.3.1.0 Introduced Usage Information You cannot disable leaking from one level to another; however, you can regulate the rate flow from one level to another using an IP Prefix list. If you do not configure the IP Prefix list, all routes are leaked. You cannot enable leaking from Level 2 to Level 1, conditional route leaking can be enabled via IP prefix-list. You can find more information in IETF RFC 2966, Domain-wide Prefix Distribution with Two-Level IS-IS. area-password Configure a hash message authentication code (HMAC) password for an area. C9000 Series Syntax area-password [hmac-md5 | encryption-type] password To delete a password, use the no area-password command. Parameters hmac-md5 encryption-type password (OPTIONAL) Enter the keywords hmac-md5 to encrypt the password. (OPTIONAL) Enter 7 to encrypt the password using DES. Enter a 1 to 16-character length alphanumeric string to prevent unauthorized access or incorrect routing information corrupting the link state database. The password is processed as plain text, which only provides limited security. Defaults Not configured. Command Modes ROUTER ISIS Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. Intermediate System to Intermediate System (IS-IS) 1045