Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 282

Version 6.5.10 Description Expanded to include the optional QoS order priority for the ACL entry. Usage Information Use the order option only when you use policy-based QoS on the switch. For more information, refer to the Quality of Service chapter of the C9000 Series Configuration Guide. When you use the log option, the CP processor logs detail the packets that match. Depending on how many packets match the log entry and at what rate, the CP may become busy as it has to log these packets' details. By default, 10 ACL logs are generated if you do not specify the threshold explicitly. The default frequency at which ACL logs are generated is five minutes. By default, flowbased monitoring is not enabled. Use the monitor option only when you are using flow-based monitoring. For more information, refer to the Port Monitoring chapter of the C9000 Series Configuration Guide. Related Commands deny - Assigns a IP ACL filter to deny IP packets. ip access-list standard - creates a standard ACL. resequence access-list Re-assign sequence numbers to entries in an existing ACL. C9000 Series Syntax Parameters resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-toIncrement} ipv4 | ipv6 | mac access-list-name StartingSeqNum Step-toIncrement Enter the keyword ipv4, ipv6 or mac to identify the access-list type to resequence. Enter the name of a configured ACL. Enter the starting sequence number to resequence. For IPv4 and IPv6 ACLs, the range is 0 to 4294967290; for MAC ACLs, the range is 0 to 65535. Enter the step to increment the sequence number. For IPv4 and IPv6 ACLs, the range is 0 to 4294967290; for MAC ACLs, the range is 0 to 65535. Access Control Lists (ACL) 282