Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1996

Version 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information If you want to log in without being prompted for a password, log in through RSA authentication. To do that, first add the SSHv2 RSA public keys to the list of authorized keys. This command adds the specified RSA keys to the following file: flash:// ADMIN_DIR/ssh/authorized-keys-username (where username is the user associated with this terminal). NOTE: The no form of this command deletes the file flash://ADMIN_DIR/ ssh/ authorized-keys-username file. Related Commands show ip ssh rsa-authentication - displays the RSA authorized keys. ip ssh rsa-authentication (Config) - enables RSA authentication. ip ssh server Configure an SSH server. The SSH server is enabled by default. C9000 Series Syntax NOTE: Some of the parameters in this command require licensing to access. For more information, contact your Dell Networking representative. ip ssh server {ciphers cipher-list} {enable | port port-number} [kex key-exchange-algorithm] [mac hmac-algorithm] [version {1 | 2}] To disable SSH server functions, use the no ip ssh server {ciphers cipherlist} {enable | port port-number} [kex key-exchange-algorithm] [mac hmac-algorithm] [version {1 | 2}] command. Parameters enable ciphers cipher-list Enter the key word enable to start the SSH server. Enter the keyword ciphers and then a space-delimited list of ciphers that the SSH server supports. The following ciphers are available. • 3des-cbc • aes128-cbc • aes192-cbc Security 1996