Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1783

switchport mode private-vlan Set PVLAN mode of the selected port. C9000 Series Syntax [no] switchport mode private-vlan {host | promiscuous | trunk} To remove PVLAN mode from the selected port, use the no switchport mode private-vlan command. Parameters host promiscuous trunk Enter the keyword host to configure the selected port or port channel as an isolated interface in a PVLAN. Enter the keyword promiscuous to configure the selected port or port channel as a promiscuous interface. Enter the keyword trunk to configure the selected port or port channel as a trunk port in a PVLAN. Defaults Disabled. Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Usage Information The assignment of the various PVLAN port types to port and port channel (LAG) interfaces is shown in the following example. Example Dell#conf Dell(conf)#interface TenGigabitEthernet 2/1 Private VLAN (PVLAN) 1783