Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 258

calculated according to the following formula: dot1x server-timeout seconds > (radius-server retransmit seconds + 1) * radius-server timeout seconds. Where the default values are as follows: dot1x server-timeout (30 seconds), radius-server retransmit (3 seconds), and radius-server timeout (5 seconds). For example: Dell(conf)#radius-server host 10.11.197.105 timeout 6 Dell(conf)#radius-server host 10.11.197.105 retransmit 4 Dell(conf)#interface tengigabitethernet 2/23 Dell(conf-if-te-2/23)#dot1x server-timeout 40 Use this command in Interface Batch Mode to configure the server time-out in a dualhoming setup. dot1x static-mab Enable static MAC authorization bypass (MAB) and configure static MAB profile to an interface. Syntax Parameters [no] dot1x static-mab profile profile-name profile profilename Enter the keyword profile and the profile-name to configure the static MAB profile name. The profile name length is limited to 32 characters. Defaults Disabled. Command Modes INTERFACE INTERFACE (BATCH MODE) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.10(0.0) 9.9(0.0) Description Introduced on the S3100 series, S4048-ON, S4048-ON, S4810, S4820T, S5000, S6000, S6000-ON, the Configuration Terminal Batch mode on C9010, Z9100-ON, and Z9500. Introduced on the C9010. Usage Information The dot1x static-mab command enables static MAB (mac auth bypass) and configures the associated profile on a dot1x interface. Static MAB bypasses the 802.1X 258