Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1556

show ip ospf statistics Display OSPF statistics. C9000 Series Syntax Parameters show ip ospf [process-id | vrf vrf-name] statistics global | [interface name {neighbor router-id}] process-id vrf vrf-name global interface name Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Enter the keyword vrf and the name of the VRF to display statistics corresponding to the OSPF process that is tied to a specific VRF. Enter the keyword global to display the packet counts received on all running OSPF interfaces and packet counts OSPF neighbors receive and transmit. (OPTIONAL) Enter the keyword interface then one of the following interface keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. • For a Loopback interface, enter the keyword loopback then a number from 0 to 16383. • For a Null interface, enter the keywords null 0. • For a Port Channel interface, enter the keywords port- channel then a number. • For a tunnel interface, enter the keyword tunnel then the tunnel ID. The range is from 1 to 16383. • For a VLAN interface, enter the keyword vlan then a number from 1 to 4094. neighbor router- (OPTIONAL) Enter the keyword neighbor then the neighbor's id router-id in dotted decimal format (A.B.C.D.). Defaults Command Modes none • EXEC Open Shortest Path First (OSPFv2 and OSPFv3) 1556