Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1801

class-map Create a class map. Class maps differentiate traffic so that you can apply separate quality-of-service policies to each class. C9000 Series Syntax Parameters class-map {match-all | match-any} class-map-name [layer2] [cpuqos] match-all match-any class-map-name layer2 cpu-qos Determines how packets are evaluated when multiple match criteria exist. Enter the keywords match-all to determine that the packets must meet all the match criteria in order to be a member of the class. Determines how packets are evaluated when multiple match criteria exist. Enter the keywords match-any to determine that the packets must meet at least one of the match criteria in order to be a member of the class. Enter a name of the class for the class map in a character format (32 character maximum). Enter the keyword layer2 to specify a Layer 2 Class Map. The default is Layer 3. Enter the keyword cpu-qos to create a class map to filter protocol traffic for rate-limiting control-plane traffic (CoPP). Defaults Layer 3 Command Modes CONFIGURATION CONFIGURATION TERMINAL BATCH Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.10(0.0) 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 Description Introduced the Configuration Terminal Batch mode on C9010. Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Quality of Service (QoS) 1801