Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1398

snooping [vlan vlan-id] [groupaddress [sourceaddress]] Enter the keyword snooping to display information on the multicast routes PIM-SM snooping discovers. Enter a VLAN ID to limit the information displayed to the multicast routes PIM-SM snooping discovers on a specified VLAN. The VLAN ID range is from 1 to 4094. Enter a multicast group address and, optionally, a source multicast address in dotted decimal format (A.B.C.D) to limit the information displayed to the multicast routes PIM-SM snooping discovers for a specified multicast group and source. summary vlt (OPTIONAL) Enter the keyword summary to view a summary of all routes. (OPTIONAL) Enter the keyword vlt to view multicast routes with a spanned incoming interface. Enter a multicast group address in dotted decimal format (A.B.C.D) to limit the information displayed to the multicast routes for a specified multicast group and optionally a source multicast address in dotted decimal format (A.B.C.D) to limit the information displayed for a specified multicast source. Enter the keyword count to display the total number of multicast routes with the spanned IIF. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.) 9.0.2.0 9.2.(0.0) 8.4.1.1 8.3.19.0 8.3.7.0 7.6.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the S6000. Added support for keyword vlt to the Z9000, S4810, and S4820T. Support for the keyword snooping and the optional vlan vlan-id, group-address, and source-address parameters were added on E-Series ExaScale. Introduced on the S4820T. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Multicast 1398