Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1057

Version 6.3.1.0 Description Introduced. Usage Information When you use this command to redistribute routes into a routing domain, the router becomes an autonomous system (AS) boundary router. An AS boundary router does not always generate a default route into a routing domain. The router still requires its own default route before it can generate one. How a metric value assigned to a default route advertises depends on the metricstyle command configuration. If the metric-style command is set for Narrow mode and the metric value in the default-information originate command is set to a number higher than 63, the metric value advertised in the LSPs is 63. If the metric-style command is set for Wide mode, the metric value in the defaultinformation originate command is advertised. Related Commands • redistribute - redistributes routes from one routing domain to another routing domain. description Enter a description of the IS-IS routing protocol. C9000 Series Syntax description {description} To remove the description, use the no description {description} command. Parameters description Enter a description to identify the IS-IS protocol (80 characters maximum). Defaults none Command Modes ROUTER ISIS Command History Version 9.9(0.0) 9.5(0.1) 9.0.2.0 8.3.19.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Intermediate System to Intermediate System (IS-IS) 1057