Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2075

Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 Description Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size does not affect messages stored in the buffer. Related Commands clear logging - clears the logging buffer. default logging buffered - returns the logging buffered parameters to the default setting. show logging - displays the logging setting and system messages in the internal buffer. logging console Specify which messages are logged to the console. C9000 Series Syntax logging console [level] To return to the default values, use the default logging console command. To disable logging to the console, use the no logging console command. Parameters level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 7 or debugging. Defaults level = 7; size = debugging Command Modes CONFIGURATION Simple Network Management Protocol (SNMP) and Syslog 2075