Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 987

linecard slotnumber (OPTIONAL) Enter the keyword linecard then the slot number. The slot ID is from 0 to 11. Defaults Command Modes none • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.5.1.0 8.1.1.0 7.6.1.0 7.5.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for 4-port 40G line cards on ExaScale. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information To view the show output for multiple ports of a specified slot at a time, you can specify any random port number or a range of ports, or a combination of both. To specify a port range, you can enter a hyphenated range of one or more port range values separated with commas; for example, show interfaces status FortyGigE 1/0-4,7,9-11. To enter any random number of ports, you can enter a commaseparated string of port numbers, for example show interfaces status FortyGigE 1/0/1,9,11 NOTE: The port-range option is only available for 1 Gigabit Ethernet, 10-Gigabit Ethernet, 40-Gigabit Ethernet, Fast Ethernet, FC, Port Channel, and VLAN interfaces. Dell#sho interfaces status | no-more Port Description Status Speed Duplex Vlan Fo 0/0 Down 40000 Mbit Auto -- Fo 0/4 Down 40000 Mbit Auto -- Fo 0/8 Down 40000 Mbit Auto -- Fo 0/12 Down 40000 Mbit Auto -- Fo 0/16 Down 40000 Mbit Auto -- Fo 0/20 Down 40000 Mbit Auto -- Interfaces 987