Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2064

encrypted auth md5 | sha (OPTIONAL) Enter the keyword encrypted to specify the password appear in encrypted format (a series of digits, masking the true characters of the string). (OPTIONAL) Enter the keyword auth to specify authentication of a packet without encryption. (OPTIONAL) Enter the keyword md5 or sha to designate the authentication level. • md5 - Message Digest Algorithm • sha - Secure Hash Algorithm auth-password priv des56 | aes128 (OPTIONAL) Enter a text string (up to 20 characters long) password that enables the agent to receive packets from the host. Minimum: eight characters long. (OPTIONAL) Enter the keywords priv to initiate a privacy authentication level setting. (OPTIONAL) Enter the keyword des56 or aes128 to specify the encryption mode. • aes128 - Use 128 bit AES algorithm in CFB mode for encryption. • des56 - Use 56 bit DES algorithm in CBC mode for encryption. priv password access accesslist-name ipv6 access-listname access-list-name ipv6 access-listname (OPTIONAL) Enter a text string (up to 20 characters long) password that enables the host to encrypt the contents of the message it sends to the agent. Minimum: eight characters long. (Optional) Enter the standard IPv4 access list name (a string up to 16 characters long). (Optional) Enter the keyword ipv6 then the IPv6 access list name (a string up to 16 characters long). (Optional) Enter both an IPv4 and IPv6 access list name. Defaults As above. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) Description Introduced on the C9010. Simple Network Management Protocol (SNMP) and Syslog 2064