Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2108

Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.2.1.0 Description Introduced on the C9010. Introduced on the S6000. Introduced on the S4820T. Introduced on the S4810. Introduced on the C-Series and S-Series. bridge-priority Set the bridge priority of the switch in an IEEE 802.1D spanning tree. C9000 Series Syntax bridge-priority {priority-value | primary | secondary} To return to the default value, use the no bridge-priority command. Parameters priority-value primary secondary Enter a number as the bridge priority value. The range is from 0 to 65535. The default is 32768. Enter the keyword primary to designate the bridge as the root bridge. Enter the keyword secondary to designate the bridge as a secondary root bridge. Defaults priority-value = 32768 Command Modes SPANNING TREE (The prompt is "config-stp".) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) Description Introduced on the C9010. Spanning Tree Protocol (STP) 2108