Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1727

Usage Information The following example displays the CSP session information for the port extenders. The command output shows the following information: • TxPDUSemStatus shows the next port extender CSP PDU TX state machine status. • RxPDUSemStatus shows the last port extender CSP PDU RX state machine status. • LocalReqSemStatus shows the port extender CSP local request state machine status. • RemoteReqSemStatus shows the port extender CSP remote request state machine status Example Dell#show pe csp -- Port Extenders CSP Information -- PE-id TxPDUSemStatus RxPDUSemStatus LocalReqSemStatus RemoteReqSemStatus 254 WAIT_TX WAIT_RX RESP_RECVED SEND_RESP show pe errors Display the port extender error logs. C9000 Series Syntax show pe errors Default None Command Modes • EXEC • EXEC Privileged Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) Introduced on the C9010. In the following example, the Te 1/16 is added as a cascade interface in PE 9, but Te1/16 is connected to a different PE, which is not provisioned. Hence, the cascade interface is kept in error state. Example Dell#show pe errors PE-id: Not Assigned Port Extenders (PE) 1727