Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1262

Related Commands capability, traffic with particular flows that are traversing through the ingress and egress interfaces are examined and, appropriate ACLs can be applied in both the ingress and egress direction. Flow-based monitoring conserves bandwidth by monitoring only specified traffic instead all traffic on the interface. This feature is particularly useful when looking for malicious traffic. It is available for Layer 2 and Layer 3 ingress and egress traffic. You may specify traffic using standard or extended access-lists. This mechanism copies all incoming or outgoing packets on one port and forwards (mirrors) them to another port. The source port is the monitored port (MD) and the destination port is the monitoring port (MG). permit (for Standard IPv6 ACLs) - configures a filter to forward IPv6 packets. show ipv6 access-lists Display IPv6 access-list information. C9000 Series Syntax Parameters show ipv6 access-lists { [name] | interface } { in | out | interface } access-list acl_name in out interface Enter the keywords access-list to display information for all ipv6 access-lists. Enter the keywords acl_name to display information for a specified ipv6 access-list. Enter the keyword in to display information for an ipv6 ingress access-list attached to an interface. Enter the keyword out to display information for an ipv6 egress access-list attached to an interface. Enter the keyword interface to display information for an ipv6 access-list for a specific interface. Defaults None Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. IPv6 Access Control Lists (IPv6 ACLs) 1262