Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 366

match ip address To match routes based on IP addresses specified in an access list, configure a filter. C9000 Series Syntax match ip address prefix-list-name To delete a match, use the no match ip address prefix-list-name command. Parameters prefix-list-name Enter the name of configured prefix list, up to 140 characters. Defaults Not configured. Command Modes ROUTE-MAP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands match interface - redistributes routes that match the next-hop interface. match ip next-hop - redistributes routes that match the next-hop IP address. match ip route-source - redistributes routes that match routes advertised by other routers. match metric - redistributes routes that match a specific metric. Access Control Lists (ACL) 366