Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1716

Example Dell#connect pe 254 Login: peadmin Password: DellPE> feature extended-bridge Enable 802.1BR (bridge port extender) support on the switch. C9000 Series Syntax [no] feature extended-bridge To disable 802.1BR support on the switch, use the no feature extended-bridge command. Default None Command Modes CONFIGURATION CONFIGURATION TERMINAL BATCH Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.10(0.0) 9.9(0.0) Description Introduced the Configuration Terminal Batch mode on C9010. Introduced on the C9010. Usage Information This command enables support for the 802.1 bridge PE (BR) on the switch. Enabling the PE feature allows you to provision the PE. The no feature extended-bridge command disables bridge PE support and deprovisions a PE. When you use this command in the Configuration Terminal Batch mode, you can enable the support for the bridge PE connected in a Dual-Homing setup. You can use the show feature command to check whether the extended-bridge feature has been enabled as shown in the following example. Example Dell>show feature Feature ------- State ----- Port Extenders (PE) 1716