Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 669

show control-traffic queue Display per-queue counters of rate-limited control-plane traffic. C9000 Series Syntax Parameters show contol-traffic queue {all | queue-id queue-number} counters all queue-id queuenumber Enter the keyword all to display counters for rate-limited traffic on all CPU queues, including Route Processor, Control Processor, and line-card CPUs. Enter the queue number to display counters for rate-limited traffic on a specified CPU queue. For the C9000 Series, the range of queue-number values is from 0 to 20. The twenty-one control-plane queues are divided into groups of seven queues for the Route Processor, Control Processor, and line-card CPUs as follows: C9000 Series • Queues 0 to 6 process packets destined to the Control Processor CPU . • Queues 7 to 13 process packets destined to the Route Processor CPU. • Queues 14 to 20 process packets destined to the line card CPU. Defaults None Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.8.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Control Plane Policing (CoPP) 669