Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2178

Version 7.5.1.0 6.1.1.0 Description Introduced on the C-Series. Introduced on the E-Series. Usage Information The following describes the show ntp status command shown in the Example below. Field Description "Clock is..." States whether or not the switch clock is synchronized, which NTP stratum the system is assigned and the IP address of the NTP peer. "frequency is..." Displays the frequency (in ppm), stability (in ppm) and precision (in Hertz) of the clock in this system. "reference time is..." Displays the reference time stamp. "clock offset is..." Displays the system offset to the synchronized peer and the time delay on the path to the NTP root clock. "root dispersion is..." Displays the root and path dispersion. "peer mode is..." State what NTP mode the switch is. This should be Client mode. Example Related Commands Dell#sh ntp status Clock is synchronized, stratum 2, reference is 100.10.10.10 frequency is -32.000 ppm, stability is 15.156 ppm, precision is 4294967290 reference time is BC242FD5.C7C5C000 (10:15:49.780 UTC Mon Jan 10 2000) clock offset is clock offset msec, root delay is 0.01656 sec root dispersion is 0.39694 sec, peer dispersion is peer dispersion msec peer mode is client Dell# show ntp associations - displays information on the NTP master and peer configurations. System Time and Date 2178