Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 570

route-map mapname (OPTIONAL) Enter the keywords route-map followed by the name of a configured route map. Only match commands in the configured route map are supported. Defaults Disabled. Command Modes ROUTER BGPV6-ADDRESS FAMILY Command History Version Description 9.9(0.0) Introduced on the C9010. 9.2(1.0) Introduced on the Z9500. 8.2.1.0 Introduced on the E-Series ExaScale. 7.4.1.0 Introduced Usage Information If you enter bgp dampening, the default values for half-life, reuse, suppress, and max-suppress-time are applied. The parameters are position-dependent; therefore, if you configure one parameter, you must configure the parameters in the order they appear in the command. Related Commands show ip bgp dampened-paths - views the BGP paths. bgp default local-preference Change the default local preference value for routes exchanged between internal BGP peers. C9000 Series Syntax bgp default local-preference value To return to the default value, use the no bgp default local-preference command. Parameters value Defaults 100 Command Modes ROUTER BGP Command History Version 9.9(0.0) Enter a number to assign to routes as the degree of preference for those routes. When routes are compared, the higher the degree of preference or local preference value, the more the route is preferred. The range is 0 to 4294967295. The default is 100. Description Introduced on the C9010. Border Gateway Protocol 570