Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1228

connected all static summary (OPTIONAL) Enter the keyword connected to view only the directly connected routes. (OPTIONAL) Enter the keyword all to view both active and non-active routes. (OPTIONAL) Enter the keyword static to view only routes the ip route command configures. (OPTIONAL) Enter the keyword summary. For more information, refer to the show ip route summary command. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.7(0.1) 9.7(0.1) 9.7(0.0) 9.4.(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.9.1.0 7.6.1.0 7.5.1.0 pre-6.1.1.0 Description Introduced on the C9010. Introduced on the S3048-ON. Introduced on the S4048-ON. Introduced on the S6000-ON. Added support for VRF. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced VRF on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Example Dell#show ip route all Codes:C- connected, S - static, R - RIP B- BGP, IN - internal BGP, EX - external BGP, LO - Locally Originated O- OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1 N2- OSPF NSSA external type 2, E1 - OSPF external type 1 IPv4 Routing 1228