Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1520

Parameters connected rip static Enter the keyword connected to specify that information from active routes on interfaces is redistributed. Enter the keyword rip to specify that RIP routing information is redistributed. Enter the keyword static to specify that information from static routes is redistributed. metric metricvalue metric-type typevalue (OPTIONAL) Enter the keyword metric then a number. The range is from 0 (zero) to 16777214. (OPTIONAL) Enter the keywords metric-type then one of the following: • 1 = OSPF External type 1 • 2 = OSPF External type 2 route-map mapname tag tag-value (OPTIONAL) Enter the keywords route-map then the name of the route map. (OPTIONAL) Enter the keyword tag then a number. The range is from 0 to 4294967295. Defaults Not configured. Command Modes ROUTER OSPF Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information To redistribute the default route (0.0.0.0/0), configure the default-information originate command. Open Shortest Path First (OSPFv2 and OSPFv3) 1520