Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1135

Version 9.9(0.0) Version 9.5(0.0) Version 9.0.2.0 Version 8.3.19.0 Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Introduced on the E-Series. Usage Information Mapping applies to both v1 and v2 IGMP joins; any updates to the ACL are reflected in the IGMP groups. You may not use extended access lists with this command. When you configure a static SSM map and the router cannot find any matching access lists, the router continues to accept (*,G) groups. Related Commands ip access-list standard - creates a standard access list to filter based on IP address. ip igmp static-group Configure an IGMP static group. C9000 Series Syntax ip igmp static-group {group address [exclude [source address]] | [include {source address}]} To delete a static address, use the no ip igmp static-group {group address [exclude [source address]] | [include {source address}]} command. Parameters group address exclude source address include source address Defaults none Command Modes INTERFACE Enter the group address in dotted decimal format (A.B.C.D). (OPTIONAL) Enter the keyword exclude then the source address, in dotted decimal format (A.B.C.D), for which a static entry is added. (OPTIONAL) Enter the keyword include then the source address, in dotted decimal format (A.B.C.D), for which a static entry is added. Internet Group Management Protocol (IGMP) 1135