Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1324

Column Heading Type Interface Description Lists whether the MAC address was manually configured (Static), learned dynamically (Dynamic), or associated with a specific port (Sticky). Displays the interface type and slot/port information. The following abbreviations describe the interface types: • po - Port Channel then a number. The range is from 1 to 255 for TeraScale. • te - 10-Gigabit Ethernet then a slot/port. • fo - 40-Gigabit Ethernet then a slot/port. State Lists if the MAC address is in use (Active) or not in use (Inactive). Example Dell(conf)#do show mac-address-table Codes: *N - VLT Peer Synced MAC VlanId Mac Address Type 2 00:00:00:00:00:01 Dynamic (N) 2 00:00:00:00:00:02 Dynamic (N) 2 00:00:00:00:00:03 Dynamic 100 Active 2 00:00:00:00:00:04 Dynamic 10 Active Interface Po 128 Po 10 Po Po State Active Active Usage Information The following describes the show mac-address-table command shown in the following example. Column Heading VlanId Mac Address Type Interface Description Displays the VLAN ID number. Displays the MAC address in nn:nn:nn:nn:nn:nn format. Lists whether the MAC address was manually configured (Static), learned (Dynamic), or associated with a specific port (Sticky). An (N) indicates that the specified MAC address has been learnt by a neighbor and is synced to the node. Displays the interface type and slot/port information. The following abbreviations describe the interface types: • po - Port Channel followed by a number. Range for Terascale is from 1 to 255. \ • te - 10-Gigabit Ethernet followed by a slot/port. • fo - 40-Gigabit Ethernet then a slot/port. State Lists if the MAC address is in use (Active) or not in use (Inactive). The following describes the show mac-address-table count command shown in the following example. Layer 2 1324