Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1554

Version 7.5.1.0 6.1.1.1 Description Introduced on the C-Series. Introduced on the E-Series. Usage Information The following describes the show ip ospf process-id neighbor command shown in the following example. Item Description Neighbor ID Displays the neighbor router ID. Pri Displays the priority assigned neighbor. State Displays the OSPF state of the neighbor. Dead Time Displays the expected time until the system declares the neighbor dead. Address Displays the IP address of the neighbor. Interface Displays the interface type slot/port information. Area Displays the neighbor's area (process ID). Example Dell#show ip ospf 34 neighbor Neighbor ID Pri State Dead Time Address Interface Area 20.20.20.7 1 FULL/DR 00:00:32 182.10.10.3 Te 0/0 0.0.0.2 192.10.10.2 1 FULL/DR 00:00:37 192.10.10.2 Te 0/1 0.0.0.1 20.20.20.1 1 FULL/DROTHER00:00:36 192.10.10.4 Te 0/1 0.0.0.1 Dell# show ip ospf routes Display routes OSPF calculates and stores in OSPF RIB. C9000 Series Syntax Parameters show ip ospf [process-id|vrf vrf-name]routes process-id vrf vrf-name Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Enter the keyword vrf and the name of the VRF to view the OSPF RIB information corresponding to the OSPF processes that are tied to a specific VRF. Defaults none Open Shortest Path First (OSPFv2 and OSPFv3) 1554