Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1321

Parameters linecard slot-id (REQUIRED) Enter the keyword linecard then a slot number to select the linecard for which to gather information. The range of C9000 slot IDs are from 0 to 11. port-set port-pipe (REQUIRED) Enter the keywords port-set then a port-pipe number to specify the port pipe for which to gather information. The range of port pipe numbers is from 0 to 0. address mac-addr (OPTIONAL) Enter the keyword address then a MAC address in the nn:nn:nn:nn:nn:nn format to display information on that MAC address. dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC addresses the switch dynamically learns. interface interface (OPTIONAL) Enter the keyword interface then the interface type, slot and port information: • For a Port Channel interface, enter the keywords portchannel then a number. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. static vlan vlan-id (OPTIONAL) Enter the keyword static to display only those MAC addresses specifically configured on the switch. (OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC address assigned to the VLAN. The range is 1 to 4094. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.5.1.0 8.3.7.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Added support for 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the C-Series. Layer 2 1321