Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 332

• For a Port Channel interface, enter the keyword portchannel and then enter a number. The C-Series and SSeries range is from 1 to 4096. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet and then enter the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE and then enter the slot/port information. • For a VLAN interface, enter the keyword VLAN followed by the vlan id. • For a PE Gigabit Ethernet interface, enter the keyword peGigE then the pe-id/stack-unit/ port-id information. in Display information of L2 ingress access-list configured to an interface. out Display information of L2 egress access-list configured to an interface. Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.5.1.0 8.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for 4-port 40G line cards on ExaScale. Introduced. Usage information This command displays ingress or egress L2 access-list information based on a given option. If no ingress or egress access-list is attached to an interface, no information displays and you return to the DELL# prompt. Example Dell#show mac access-lists in Standard mac access list m1 seq 5 permit 11:22:33:44:55:66 count (0 packets) Standard mac access list m2 seq 5 deny any order 2 seq 10 permit 00:33:00:11:00:77 33:44:55:66:77:88 count (0 Access Control Lists (ACL) 332