Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 802

client statistics {all | interface type slot/port} Enter the keywords server statistics all to clear all counter information on all DHCP client interfaces on the switch. Enter an interface type and slot/port information to clear DHCP counters on a specified interface. The valid interface types are: • For a 10-Gigabit Ethernet interface, enter the keyword tengigabitethernet. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE. conflicts server statistics Enter the keyword conflicts to delete all of the log entries created for IP address conflicts. Enter the keywords server statistics to clear all counter information on the DHCP server. Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820t. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Usage Information Entering after the clear ip dhcp binding command clears all the IPs from the binding table. debug ip dhcp client events Activate the debugging and display of log messages on DHCP client interfaces for IP address acquisition, IP address release, and IP address and lease time renewal. C9000 Series Syntax debug ip dhcp client events [interface type slot/port] Dynamic Host Configuration Protocol (DHCP) 802