Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2055

Parameters To remove a specified group, use the no snmp-server group [group_name {v1 | v2c | v3 {auth | noauth | priv}}] [read name] [write name] [notify name] [access access-list-name | ipv6 access-list-name | access-list-name ipv6 access-list-name]] command. group_name 1 | 2c | 3 Enter a text string (up to 20 characters long) as the name of the group. The following groups are created for mapping to read/ write community/security-names (defaults): • v1v2creadg - maps to a community/security-name with ro permissions. • 1v2cwriteg - maps to a community/security-name rw permissions. (OPTIONAL) Enter the security model version number (1, 2c, or 3): • 1 is the least secure version. • 3 is the most secure of the security modes. • 2c allows transmission of informs and counter 64, which allows for integers twice the width of what is normally allowed. The default is 1. auth noauth priv read name write name notify name access accesslist-name ipv6 access-listname (OPTIONAL) Enter the keyword auth to specify authentication of a packet without encryption. (OPTIONAL) Enter the keyword noauth to specify no authentication of a packet. (OPTIONAL) Enter the keyword priv to specify both authentication and then scrambling of the packet. (OPTIONAL) Enter the keyword read then a name (a string of up to 20 characters long) as the read view name. The default is GlobalView and is assumed to be every object belonging to the internet (1.3.6.1) OID space. (OPTIONAL) Enter the keyword write then a name (a string of up to 20 characters long) as the write view name. (OPTIONAL) Enter the keyword notify then a name (a string of up to 20 characters long) as the notify view name. (Optional) Enter the standard IPv4 access list name (a string up to 16 characters long). (Optional) Enter the keyword ipv6 then the IPv6 access list name (a string up to 16 characters long). Simple Network Management Protocol (SNMP) and Syslog 2055