Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2065

Version 9.6.(0.0) 9.4.(0.0) 9.0.2.0 9.2(0.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 E-Series legacy command Description Added aes 128 encryption algorithm parameter. Added support for VRF. Introduced on the S6000. Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux (PMUX) mode only. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information NOTE: For IPv6 ACLs, only IPv6 and UDP types are valid for SNMP. TCP and ICMP rules are not valid for SNMP. In IPv6 ACLs port rules are not valid for SNMP. No default values exist for authentication or privacy algorithms and no default password exists. If you forget a password, you cannot recover it; the user must be reconfigured. You can specify either a plain-text password or an encrypted cypher-text password. In either case, the password is stored in the configuration in an encrypted form and displayed as encrypted in the show running-config command. If you have an encrypted password, you can specify the encrypted string instead of the plain-text password. The following command is an Example of how to specify the command with an encrypted string. NOTE: The number of configurable users is limited to 16. Example Dell# snmp-server user privuser v3group v3 encrypted auth md5 9fc53d9d908118b2804fe80e3ba8763d priv des56 d0452401a8c3ce42804fe80e3ba8763d Usage Information The following command is an example of how to enter a plain-text password as the string authpasswd for user authuser of group v3group. Example Dell#conf Dell(conf)# snmp-server user authuser v3group v3 auth md5 authpasswd Usage Information The following command configures a remote user named n3user with a v3 security model and a security level of authNOPriv. Example Dell#conf Dell(conf)# snmp-server user n3user ngroup remote 172.31.1.3 udp- Simple Network Management Protocol (SNMP) and Syslog 2065