Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1690

Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.0) 9.0.2.0 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.8.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Usage Information The following describes the show ip pim interface command shown in the following example. Field Address Description Lists the IP addresses of the interfaces participating in PIM. Interface Ver/Mode List the interface type, with either slot/port information or ID (VLAN or Port Channel), of the interfaces participating in PIM. Displays the PIM version number and mode for each interface participating in PIM: • v2 = PIM version 2 • S = PIM Sparse mode Nbr Count Query Intvl DR Prio DR Displays the number of PIM neighbors discovered over this interface. Displays the query interval for Router Query messages on that interface (configured with ip pim query-interval command). Displays the Designated Router priority value configured on the interface (use the ip pim dr-priority command). Displays the IP address of the Designated Router for that interface. PIM-Sparse Mode (PIM-SM) 1690