Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 380

To remove a set level condition, use the no set level {backbone | level-1 | level-1-2 | level-2 | stub-area} command. Parameters backbone level-1 level-1-2 level-2 stub-area Enter the keyword backbone to redistribute matched routes to the OSPF backbone area (area 0.0.0.0). Enter the keyword level-1 to redistribute matched routes to IS-IS Level 1. Enter the keyword level-1-2 to redistribute matched routes to IS-IS Level 1 and Level 2. Enter the keyword level-2 to redistribute matched routes to IS-IS Level 2. Enter the keyword stub to redistributed matched routes to OSPF stub areas. Defaults Not configured. Command Modes ROUTE-MAP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands set automatic-tag - computes the tag value of the route. set metric - specifies the metric value assigned to redistributed routes. set metric-type - specifies the metric type assigned to redistributed routes. set tag - specifies the tag assigned to redistributed routes. Access Control Lists (ACL) 380