Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1403

Parameters peer address Enter the peer address in a dotted decimal format (A.B.C.D.) Defaults Not configured. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.1) 8.3.19.0 8.3.11.1 8.3.7.1 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced clear ip msdp sa-cache Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or local source-active entries. C9000 Series Syntax Parameters clear ip msdp sa-cache [group-address | rejected-sa | local] group-address rejected-sa local Enter the group IP address in dotted decimal format (A.B.C.D.). Enter the keywords rejected-sa to clear the cache sourceactive entries that are rejected because the RPF check failed, an SA filter or limit is configured, the RP or MSDP peer is unreachable, or because of a format error. Enter the keyword local to clear out local PIM advertised entries. It applies the redistribute filter (if present) while adding the local PIM SA entries to the SA cache. Defaults Without any options, this command clears the entire source-active cache. Command Modes EXEC Privilege Multicast Source Discovery Protocol (MSDP) 1403