Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 106

Parameters limit number-ofsessions Sets the number of concurrent sessions that any user can have on console and virtual terminal lines. The range is from 1 to 12 (10 VTY lines, one console, and one AUX line). clear-line enable Enables you to clear your existing sessions. Defaults Not configured. You can use all the available sessions. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.8(0.0) Description Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S4810, S4820, S5000, S6000, S6000-ON, and Z9500. Usage Information You must have either the System Administrator or Security Administrator privileges to configure login concurrent-session limit or to enable clear-line. To limit the number of concurrent sessions that any user can have on console, auxiliary, and virtual terminal lines, use the login concurrent-session limit number-of-sessions command. If the login concurrent-session clear-line enable command is configured, you are provided with an option to clear any of your existing sessions after a successful login authentication. When you reach the maximum concurrent session limit, you can still log in by clearing any of your existing sessions. Example The following example shows how to limit the number of concurrent sessions that any user can have to four: Dell(conf)# login concurrent-session limit 4 Dell(conf)# The following example shows how to use the login concurrent-session clearline enable command. Dell(conf)# login concurrent-session clear-line enable Dell(conf)# Control and Monitoring 106