Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1915

3 Specify an authentication method (RADIUS, TACACS+, or Local). 4 Specify authorization method (RADIUS, TACACS+ or Local). 5 Verify the configuration has been applied to the console or VTY line. role Changes command permissions for roles. C9000 Syntax role mode { { { addrole | deleterole } role-name } | reset } command To delete access to a command, use the no role mode role-name Parameters mode Enter one of the following keywords as the mode for which you are controlling access: configure for CONFIGURATION mode exec for EXEC mode interface for INTERFACE modes line for LINE mode route-map for Route-map mode router for Router mode addrole deleterole Enter the keyword addrole to add permission to the command. You cannot add or delete rights for the sysadmin role. Enter the keyword deleterole to remove access to the command. You cannot add or delete rights for the sysadmin role. Defaults role-name reset command none Enter a text string for the name of the user role up to 63 characters. These are 3 system defined roles you can modify: secadmin, netadmin, and netoperator. Enter the keyword reset to reset all roles back to default for that command. Enter the command's keywords to assign the command to a certain access level. You can enter one or more keywords. Security 1915