Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 792

Parameters eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to display ingress or egress ACL data. linecardslot-id Enter the linecard slot-id parameters to specify a line card on the switch. The range of slot IDs is from 0 to 2. port-set port-pipe Enter the keywords port-set port-pipe parameters to specify a port pipe (set of ports) on a line card. The range of port-pipe numbers is: 0 to 2 on line card 0 and 0 to 3 on line cards 1 and 2. Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Example Dell#show hardware ipv6 eg-acl linecard 0 port-set 0 EID 0x000013ce: gid=0xd, slice=0, slice_idx=0, part =0 prio=0x13ce, flags=0x10202, Installed, Enabled tcam: color_indep=0, StageEgress slice=1, slice_idx=0, part =1 prio=0x13ce, flags=0x10204, Installed, Enabled tcam: color_indep=0, Offset: 1 Width: 8 DATA=0x0000003a MASK=0x000000ff IpType Offset: 208 Width: 5 DATA=0x00000004 MASK=0x0000000c L3Routable Offset: 166 Width: 1 DATA=0x00000001 MASK=0x00000001 OutPort Offset: 195 Width: 7 DATA=0x00000001 MASK=0x0000007f action={act=Drop, param0=0(0), param1=0(0), param2=0(0), Debugging and Diagnostics 792