Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 136

all brief (OPTIONAL) Enter the keyword all to view a table with information on all present line cards (OPTIONAL) Enter the keyword brief to view an abbreviated list of line card information. Command Modes • EXEC • EXEC Privilege Command History Version 9.9(0.0) 8.1.1.0 7.5.1.0 E-Series Description Introduced on the C9010. Introduced on the E-Series ExaScale. Introduced on the C-Series. Original command. Usage Information show linecard output Field Line card Status Next Boot Required Type Current Type Hardware Rev Num Ports Up Time Dell Networking OS Version Jumbo Capable Boot Flash Ver Memory Size Description Displays the line card slot number (only listed in the show linecard all command output). Displays the line card's status. Displays whether the line card is to be brought online at the next system reload. Displays the line card type configured for the slot. The Required Type and Current Type must match. If they do not match, use the linecard command to reconfigure the line card type. Displays the line card type installed in the slot. The Required Type and Current Type must match. If they do not match, use the linecard command to reconfigure the line card type. Displays the chipset revision. Displays the number of ports in the line card. Displays the number of hours and minutes the card is online. Displays the operating software version. Displays Yes or No indicating if the line card can support Jumbo frames. Displays the two possible Bootflash versions. The [Booted] keyword next to the version states which version was used at system boot. List the memory of the line card processor. Control and Monitoring 136