Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1464

Example (Brief) Related Commands VRRP TenGigabitEthernet 2/3/4 IPv6 VRID 1 Track 3 IPv6 route 2050::/64 reachability Reachability is Up (STATIC) 5 changes, last change 00:02:16 First-hop interface is TenGigabitEthernet 1/2/1 Tracked by: VRRP TenGigabitEthernet 2/3/4 IPv6 VRID 1 Dell>show track brief ResId Resource Parameter State LastChange 1 IP route reachability 10.16.0.0/16 Up 00:01:08 2 Interface line-protocol Ethernet0/2 Down 00:05:00 3 Interface ip routing VLAN100 Up 01:10:05 • show running-config track - displays configuration information about tracked objects. • track interface ip routing - configures object tracking on the routing status of an IPv4 Layer 3 interface. • track interface line-protocol - configures object tracking on the line-protocol state of a Layer 2 interface. • track ip route metric threshold - configures object tracking on the threshold of an IPv4 route metric. • track ip route reachability - configures object tracking on the reachability of an IPv4 route. • threshold metric Configure the metric threshold used to determine the UP and/or DOWN state of a tracked IPv4 or IPv6 route. C9000 Series Syntax threshold metric {up number | down number} To return to the default setting, use the no threshold metric {up number | down number} command. Parameters up number down number Enter a number for the UP threshold to be applied to the scaled metric of an IPv4 or IPv6 route. The default UP threshold is 254. The routing state is UP if the scaled route metric is less than or equal to the UP threshold. Enter a number for the DOWN threshold to be applied to the scaled metric of an IPv4 or IPv6 route. The default DOWN threshold is 255. The routing state is DOWN if the scaled route metric is greater than or equal to the DOWN threshold. Object Tracking 1464